Vertical Exposed FCU
Vertical exposed fan coil units, 340–2,380 m³/h, 52–228 W input, 220 V single phase, floor or wall mounted. Final selection is confirmed at the duty point (airflow / static pressure / voltage / control mode) and by project verification.
| Model | Size | Max airflowm³/h | Max static pressurePa | PowerW | NoisedB(A) | Speedrpm | VoltageV | ||
|---|---|---|---|---|---|---|---|---|---|
 |
LWFC-1020LMAC | — | 1,020 | see curve | — | — | — | 220 | Details |
|
LWFC-1360LMAC | — | 1,360 | see curve | 134 | — | — | 220 | Details |
|
LWFC-1700LMAC | — | 1,700 | see curve | 152 | — | — | 220 | Details |
|
LWFC-2040LMAC | — | 2,040 | see curve | 189 | — | — | 220 | Details |
|
LWFC-2380LMAC | — | 2,380 | see curve | 228 | — | — | 220 | Details |
|
LWFC-340LMAC | — | 340 | see curve | — | — | — | 220 | Details |
|
LWFC-510LMAC | — | 510 | see curve | 52 | — | — | 220 | Details |
|
LWFC-680LMAC | — | 680 | see curve | 62 | — | — | 220 | Details |
|
LWFC-850LMAC | — | 850 | see curve | 76 | — | — | 220 | Details |
Vertical Exposed FCU — selection guide
Vertical Exposed FCU: 9 models, maximum airflow 340–2,380 m³/h, AC motors, across 9 series.
Vertical exposed fan coil units (LWFC-…LM) stand on the floor or hang on the wall in a finished casing, nine classes from 340 to 2,380 m³/h on 220 V — the simplest unit to install in a retrofit, needing only water, drain and power.
How to select from this range
- Choose for floor-standing perimeter installation; check casing height against the window sill.
- Specify top or front discharge.
Where these fans are used
- Retrofit heating and cooling
- Perimeter zones under windows
- Small offices
Every figure above is measured on our own test rigs per AMCA 210 / ISO 5801 methods — see the test labs and certificates. Final selection is confirmed at the duty point and by project validation.
FAQ — Vertical Exposed FCU
Can the vertical exposed unit be wall-hung?
Yes — floor-standing or wall-hung with the same casing; the drawing shows the bracket positions.