Poultry & Livestock Fans
Ventilation fans for poultry houses, livestock barns and greenhouses: tunnel ventilation, minimum ventilation and pad-cooling exhaust, 50–2,200 W, 220 / 380 V. Final selection is confirmed at the duty point (airflow / static pressure / voltage / control mode) and by project verification.
Poultry & Livestock Fans — selection guide
Poultry & Livestock Fans: 30 models, maximum airflow 0–52,000 m³/h, across 0 series.
Poultry and livestock fans are large-diameter, low-pressure axial fans built for dust, humidity and continuous duty: the LWPVD line from 350 mm (14 in) to 710 mm (28 in) and larger, 50–2,200 W on 220 / 380 V, for tunnel ventilation, minimum ventilation and pad-cooling exhaust in poultry houses, dairy and pig barns and greenhouses.
How to select from this range
- Size tunnel ventilation by the air speed required across the house cross-section (typically 2–3 m/s), not by fan count.
- Minimum ventilation uses smaller fans running continuously; energy efficiency and speed control matter most there.
- Specify corrosion protection and shutter type for the climate; galvanised and stainless hardware are available.
Where these fans are used
- Broiler and layer houses
- Dairy and pig barns
- Greenhouses and nurseries
Every figure above is measured on our own test rigs per AMCA 210 / ISO 5801 methods — see the test labs and certificates. Final selection is confirmed at the duty point and by project validation.
FAQ — Poultry & Livestock Fans
How many tunnel fans does a poultry house need?
Target air speed times house cross-section gives the total airflow; divide by the airflow of one fan at the pad and shutter pressure. Send house dimensions and we run the calculation.
Are variable-speed poultry fans available?
Yes, EC and inverter-ready versions for minimum ventilation and staged control.