Air Blowers (Air Knife / Air Pump)

Air Blowers (Air Knife / Air Pump) — selection guide

Air Blowers (Air Knife / Air Pump): 40 models, frame sizes 24–49 mm, maximum airflow 600–4,800 m³/h, static pressure to 2,650 Pa, AC motors, across 0 series.

AC air blowers for blow-off, drying and air-knife duties: LWB compact blowers (Ø24–37 mm impeller, 600–850 m³/h at 800–1,900 Pa, 180–550 W) and LWT blowers (Ø43–49 mm, 850–4,800 m³/h at 1,700–2,650 Pa, 680–2,250 W) on 230 V, 120 V and 220–240 V. These are high-speed units that deliver a concentrated air stream rather than volume ventilation.

How to select from this range

1. Select by the pressure at the nozzle or air knife, then check airflow; the two are traded across the curve.
2. Specify 120 V for North American equipment, 230 V for Europe; both are listed.
3. Plan for the sound level — high-pressure blowers are loud; remote mounting and a silencer are usual.

Where these fans are used

• Air knives and blow-off drying
• Inflatables and air mattresses
• Dust removal on production lines
• Combustion air for burners

Curves marked “measured” come from our own test rigs per AMCA 210 / ISO 5801 methods; digitised catalogue curves are flagged as such in the selector — see the test labs and certificates. Final selection is confirmed at the duty point and by project validation.

FAQ — Air Blowers (Air Knife / Air Pump)

Related selections